Dimplex LAB 09M Instrukcje Operacyjne Pobierz pdf (Strona 18)

17EN -

www.dimplex.de

Setting supplementary electric heater

Index - String

MIN

value

MAX

value

Parameter function

This parameter indicates the presence of a supplementary electric heater. Based on the

set value, various solutions can be described:

• set value 0 = No;

• set value 1 = Supplementary heater present but not active during domestic water production;

• set value 2 = Activate resistance command used to authorise activation of outside boiler;

•

set value 3 = Integration resistance present and active during domestic water production;

Remote panel configuration

Index - String

MIN

value

MAX

value

Parameter function

This setting configures the type of control applicable to the units; depending on the value

decided for this setting, the controls on the "functioning mode" (HEAT/COOL) and the unit

"on/off" command will be managed in the following way:

Set value 0:

• Setting functioning mode = set parameter 0

• ON/OFF control = from the panel on the machine

Set value 1:

• Setting functioning mode = set parameter 0

• ON/OFF control = from the remote panel

Set value 2:

• Setting functioning mode = set from remote contact

• ON/OFF control = from the panel on the machine

Set value 3:

• Setting functioning mode = set from remote contact

• ON/OFF control = from the remote contact

Enabling domestic hot water preparation

Index - String

MIN

value

MAX

value

Parameter function

In the heat pump models, there is the possibility to produce hot water for domestic use;

this production has it's own changeable setting and it's own band (parameters E, F user

menu); with this parameter you can make parameters E and F visible and usable.

To control the domestic hot water production, once this function has been activated, you

must use the digital input ID6. (Marked on the electric card enclosed with the TWS)

• 1, ENABLE the domestic water function

• 0, DISABLE the domestic water function

The CLOSED status of the clamp means the domestic water function is ACTIVE. This fun-

ction is available from software version 3.7 (the software version is visible as a reading,

with index E). The minimum compressor functioning time, and the defrosting time, take

priority over the production of domestic water.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 32 33

Komentarze do niniejszej Instrukcji

Brak uwag

Dimplex LAB 09M Instrukcje Operacyjne Strona 18

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Pompy ciepła Dimplex LAB 09M